language button

Tellabs® 7100 OTS System Architecture and Applications, FP6.X

TLC Keyword: 71SAA6X

Orderable part #: GSST71SAA

This instructor-led course provides knowledge of Tellabs 7100 Optical Transport System (OTS) applications, architecture, and signal flow needed to provision and maintain a Tellabs 7100 system. It also serves as the pre-requisite for the following instructor-led courses:

  • Tellabs 7100 OTS Provisioning using Tellabs 7191 Craft Station, FP 6.X
  • Tellabs 7100 OTS Provisioning using Tellabs 7190/7194 Management System, FP 6.X
  • Tellabs 7100 OTS Provisioning using TLI, FP 6.X

This course includes an optional 45-minute end of course knowledge assessment. Participants opting to take the assessment must also enroll in the Tellabs 7100 OTS System Architecture & Applications, FP 6.X - Knowledge Test (71SAA6XKT) when enrolling this instructor-led course.

Upon completion of this course, participants will be able to:

  • Demonstrate how to navigate the Tellabs Portal to access 7100 technical documentation
  • Identify the basics of Dense Wavelength Division Multiplexing (DWDM) and ITU G.709 Optical Transport Network Standards
  • Distinguish the different types of 7100 OTS configurations, functions, and applications
  • Describe the function of the Embedded Operations Network (EON)
  • Identify the various Tellabs 7100 OTS management options
  • Identify Tellabs 7100 OTS power requirements and ancillary equipment
  • Identify the 7100 OTS common modules function and location in the 7100 OTS signal flow
  • Identify the 7100 OTS transponder function and location in the 7100 OTS signal flow
  • Identify 7100 OTS special purpose modules, function, and location in the 7100 OTS signal flow
  • Identify the 7100 OTS Packet Subsystem capabilities and supporting hardware
Prerequisites: It is highly recommended that participants have the basic knowledge in:
  • Basic fiber optic transmission equipment & terminology
  • SONET/SDH interfaces, rates, and formats
  • G.709 Interfaces, signaling and format
  • Ethernet technology
  • DWDM technology
Audience: This course is designed for technicians, provisioners, managers, testers, installers, and engineers who will be responsible for designing, testing, turning up, operating, provisioning, or maintaining a Tellabs 7100 OTS.

Course Outline

1. 7100 OTS Configurations, Functions, & Applications

  • Tellabs 7100 Technology Basics
  • Tellabs 7100 Configurations, Functions & Applications

2. Embedded Operations Network (EON)

  • EON Overview & Supporting Hardware
  • EON Types
  • Router vs. Management Interface IP Addresses
  • Recommended IP Configuration
  • EON Partitioning

3. Management Options

  • Transaction Language 1 (TL1)
  • Command Line Interface (CLI)
  • Tellabs 7191 Craft Station
  • Tellabs 7190/7194 Management System
  • Tellabs 8000 Intelligent Network Manager
  • Control Plane

4. Power Requirements & Ancillary Equipment

  • Power Requirements
  • Ancillary Equipment

5. Common Modules & NE Signal Flow

  • Universal System Shelf
  • Module LEDs
  • System Processor Module
  • Horizontal Distribution Panel
  • Generic Level Signal Flow
  • Multiplexing Modules & Patch Panels
  • Amplifier Modules
  • Dispersion Compensation Modules (DCM)
  • Module Specific Signal Flow & Cabling
  • Optical Line Amplifier

6. Transponder Modules & NE Signal Flow

  • Transponder Port Shelf Locations
  • Generic Transponder Function (O-E-O)
  • Transponder Carrying Capacities
  • Transponder Common Functions
  • SFPs / XFPs and Supported Client Signal Types
  • Single Port Transponder Modules
  • Multi-Port Transponder Modules

7. Special Purpose Modules & NE Signal Flow

  • Data Processor Module (DPM)
  • SONET/SDH/Packet Fabric Module (SPFAB)
  • Channel Pass-Through Module (CPM)
  • Amplified Interconnect Module (AIM)

8. Packet Subsystem

  • Packet Subsystem Features
  • Packet Subsystem Control Interfaces
  • Packet Subsystem Equipment Requirements & Signal Flow
  • Layer 2 Virtual Switch Capabilities
  • Packet Enabled Transponders
  • Supported Protocols, Capacities, & QoS

Class Specifics

Duration: Two days
On-site classes available (Minimum of six students is required)
Lecture-based, no hands-on activities
Class size: Minimum of six to a maximum of 20 students

Enroll

To register for a class, Tellabs customers and sales partners can log in to Tellabs Learning Connections, when prompted, please enter your Tellabs Portal username and password. From the Training tab, click the Access TLC Now button.

For inquiries regarding a course not listed in our catalog, please contact your regional training center.